We’re actually already burning a lot more wood than anticipated; it’s not too cold and the house heats up fast, but we now rely on the stove for cooking & hot water. Thus we tend to have a fire going anytime we are home. I beefed up the reserves with some emergency ash or we’ll be in trouble.
506 Posts By ben
Charge controller (top), Raspberry Pi (top right), Phidgets interface kit (bellow the pi), Phidgets current sensors (bottom).
My new favorite project screws
The volt-meters (left) aren’t live yet but the amp-meters (bottom) are.
With the inverter hooked up and a properly fused distribution box
The Pi reading its sensors, Nicole is taking on the data aggregation.
The goal is to move Akrin to the Pi to have a solar powered server.
We found ~20 apple trees on the land so far. These that were not good a few weeks ago are starting to turn and become sweet. The deer apparently have a sweet tooth like we do, they are an excellent indicator of when an apple tree is good to eat. Unfortunately they are getting the lion share of the apples this year. We saw them bump into a tree to make apples fall and stand on their back legs which allows them to reach quite high.
I love old tech, this thing translates spinning into peeling, coring & slicing!
Wood fire is really interesting to cook with
Since the modifications I’m making to the house now are quite specific to our living arrangements, I’ve stopped updating the 3D model I made to design the house. I’ve also gained in confidence and experience such that I don’t need to do everything virtually before I grab a hammer.
Before launching into this adventure, I spent a good deal of time online reviewing designs, techniques and best practices. In case this is useful to someone else I’m publishing the core design here. This design was critiqued over multiple iterations by many carpenters, builders, furniture makers & all around smart handymen.
A few points:
- it is very modular
- a few features are specific to us
- the gambrel design is balanced (every angle 22.5 and equal lengths)
It took me much longer than anticipated to get the chimney in place. There is a lot to know about it and I can’t afford half measures for this one needs to be perfect. It took a lot of research and an ton of measuring and thinking to do. Also a couple of tough days spent on the roof, again. This is probably the most emotional project of this whole ordeal. Cutting a hole through the roof that cost us so much in worry, sweat and money was hard. Messing up design or tolerance could bring an abrupt end to a dream coming to fruition. On the other hand it means getting wood heat on the coldest days. It’s hard to think straight with this much at stake.
Everything went well with the chimney and the stove took quite a bit of work too, most of it was done a while back when we acquired it.
Weights a ton
We bought the stove second hand & disassembled so there was quite a bit to figure out.
To line the sides of the burning chamber with fire bricks, we had to chip them to shape with a hammer and chisel. I then coated every hole, crack or worn surface with refractory cement.
First time I got to use the expression “chipping at it” literally.
One clean looking burning chamber
We fired the stove last night; first time since we own it, first fire in our house just as the days are starting to get colder. The first of many ritualistic fires to come.
Thanks to the solar install, we’re able to power a modem. I bought a 35Ah battery and the modem draws 1A. Of course we’re powering a few other things but this is by far the biggest consumer right now. 3Mb isn’t bad at all where we are. The Fairpoint guy who showed up was awesome and didn’t mind hooking into a rudimentary shed with a 12V battery and wires all over :).